PREMIUM PRO TURF Golf Hitting Mats That Accept Wooden Tees

The size question comes first because it determines everything else — how the mat fits your space, whether you have room for a full stance, and whether you're building a permanent simulator bay or a portable practice station. The footprint options in this line run from 12"×24" up to 5'×5', and those aren't interchangeable. A 12"×24" Matzilla Tee Mat gives you a hitting surface but no room for your feet — it's designed to sit inside a larger artificial turf pad or batting cage surface, not to stand on. The 1'×2' Commercial Pro Hitting Strip works the same way: a 0.63"-thick nylon strip you set in front of an existing surface when you just need a tee spot.

If you want a single mat that handles the full stance — feet, ball position, and all — the 3'×5', 4'×5', and 5'×5' Luxury Tee Mats are the right tier. The 3'×5' (36"W × 60"L × 1.25" thick) is the most common simulator choice: wide enough for a comfortable stance, long enough that you're not stepping off the back edge. The 4'×5' adds four inches of width on each side, which matters if you're a wider-stance player or setting up for students of different builds. The 5'×5' (60"×60"×1.25") is the largest option and makes the most sense in a permanent indoor bay where you want full freedom to shift your stance without thinking about mat edges. The 2'×3' Luxury Tee Mat is the smallest full-stance option — workable for short irons and chips, tight in a simulator bay if you're hitting driver.

The 4'×5' Any Club Turf Driving Range Chipping Mat is a different construction than the Luxury Tee series: 1"-thick foam/nylon/rubber build without the 1.25" PU base, positioned for chipping and approach work rather than full-swing simulation. And the Commercial Pro 5'×5' Stance Mat uses 5/8" closed foam backing — a lower-profile option for players who want a stance surface that lies flatter. Match the mat to how you're using it, not just to the floor space you have available.

• Simulator bay (full swing, permanent setup): 4'×5' or 5'×5' Luxury Tee Mat
• Simulator bay (tighter space, budget-conscious): 3'×5' Luxury Tee Mat
• Portable range practice or travel: 2'×3' Luxury Tee Mat or 12"×24" Matzilla Tee Mat inside a larger surface
• Chipping and short game only: 4'×5' Any Club Turf Driving Range Chipping Mat
• Tee spot insert into an existing surface: Commercial Pro 1'×2' Hitting Strip
• Optishot sensor replacement: Optishot Replacement Turf Top — fits the sensor frame, accepts a wooden tee

Every mat in this line accepts a real wooden tee — not just a rubber tee insert. That matters more than it sounds. On a hard rubber mat, you're either teed off a rubber peg mounted in a pre-drilled hole or you're hitting off the mat surface directly. Both change impact feel: the rubber peg positions the ball differently than a wood tee, and the hard mat surface doesn't compress under the club the way turf does. After 50 or 100 swings, the difference shows up in your wrists and elbows.

The Luxury Tee Mats (3'×5', 4'×5', 5'×5', and 2'×3') use 1.25"-thick nylon fiber over a polyurethane base. That PU backing is what gives the surface enough give to push a wooden tee into without it immediately popping out, while still holding the tee upright through your swing. The nylon fiber itself — not polyethylene — is the other piece: nylon compresses and springs back under club impact rather than matting down permanently the way PE does. You get something closer to the through-swing feel of a fairway turf rather than the dead stop of rubber. The Matzilla Tee Mat (12"×24", 1.13" thick, urethane back) and the Commercial Pro Hitting Strip (1'×2', 0.63" thick, foam back) also accept wooden tees, with the thinner profiles reflecting their insert/portable roles.

If you're running an Optishot golf simulator, the Replacement Turf Top is built specifically for the Optishot sensor platform — all-nylon construction, accepts a wooden tee, and fits the Optishot hitting mat frame so the sensor reads the club correctly through the surface. It's the one product in this line where fit is non-negotiable: it needs to work with the Optishot unit, not just sit beside it.

All of the Luxury Tee Mats are foldable, which is one of the main practical advantages of nylon-over-PU construction at this thickness. You can roll or fold the 3'×5' or 4'×5' mat, move it out of the bay for other uses, and unroll it without the fiber staying creased. That said, storing any mat folded or rolled indefinitely will eventually leave a crease line in the fiber — if you're not using it for an extended stretch, lay it flat or unroll it in a storage area rather than leaving it folded under weight.

The polyurethane backing on the Luxury Tee Mats is safe on garage concrete, hardwood, and gym floors. It won't scratch or leave marks the way a hard rubber backing can. The urethane base on the Matzilla and the foam backing on the Commercial Pro Strip are similarly floor-safe. What you don't get with these mats is the aggressive non-slip grip of a super-grip rubber bottom — if your garage floor is polished concrete or tile, adding a non-slip mat pad underneath the hitting mat is worth considering, especially during a full-swing session where foot pressure can shift the mat.

For outdoor use: the nylon fiber resists UV degradation better than polyethylene alternatives, and it handles moisture without breaking down. But these mats aren't designed for permanent outdoor installation — the PU and foam backings aren't meant to sit on wet ground for weeks at a time. Use outdoors, bring in after the session, and the mat will last significantly longer. The turf face itself — brush it out with a stiff-bristle brush periodically if the fibers start to lay flat from repeated impact in the same spot. That's standard maintenance for any nylon mat with heavy use in a single hitting zone.